Your cart is empty.
Your cart is empty.Hakko T18-BL replacement soldering tip. Soldering Tip, Conical, 0.2mm x 22.5mm, Application Soldering, For Use With Mfr. No. FX-8801, C1148B. Soldering Tip, Conical, 0.2mm x 22.5mm. For use with FX-8801. Application Soldering.
eugene
August 8, 2025
works good. no problem.
Russ Garner
August 2, 2025
I have used knock off solder tips on my Hakko iron and I always find myself coming back home to Hakko tips. Durable, even heating, no surprises. Good stuff. Recommend.
Jim P.
July 27, 2025
Genuine Hakko tip in new packaging. I needed a tip for soldering fine pitch SMT parts to replace the burned out tip on my $100 PRC made soldering station. Fortunately, it uses Hakko T18 series tips. I expect good service from this tip.
Customer
July 23, 2025
Definitely get this for small wire gauge soldering. The Hakko irons are wonderful and they "push" heat all the way to the tip of this. This is all I use, and I regularly solder from wire gauge 22 up to 30.
Michael Buck
July 16, 2025
This is another high quality, well made Hakko tip. I have many Hakko tips and they all work well and last a long time. It is great to find as many specialty tips as Hakko makes. I definitely recommend Hakko tips for your soldering needs.
John M.
June 24, 2025
The T18-BL soldering tip is another great product from Hakko and is my "weapon of choice" for 0805 components and any SOIC chips. My only complaint is that it is hard to keep it tinned when working with lead free solder at high temperatures, but that is a problem with all irons I have used.
Michelle Goodnight
June 21, 2025
Great tip for those very small surface mount parts. Like the 0404 and 0603 sizes. Had trouble heating quickly above 0603, which is to be expected.
cat feeder
June 18, 2025
Haven't used it much, my old eyes aren't really going to make a lot of use of this thing but it's good to have around
Olli
June 14, 2025
Bought this to see if the chinese soldering station could be upgraded to better performance. The difference between the one included with the yihua and this hakko tip is astounding, would highly recommend this part to anybody with a Yihua 853AAA.
CrashedFiesta
June 12, 2025
You can get a pack of five or six tips for less than the cost of this one. But, after a few intensive soldering sessions the cheap tips basically corrode away. Not this one.The saying 'you get what you pay for' is 100% accurate here. It's been used for several weeks and still shows no signs of corrosion or blackening that the cheap ones do.
Tone
June 8, 2025
Not that good to be fare. The end of the tip is not hot enough to do the job intended for. Unless you turn the heat right up but then it just burns. I ordered 2 so hopefully it was just one bad one from the batch.
カスタマー
June 7, 2025
他の方も書いていますがこれから購入する方はご注意ください。チップ素子のハンダ付けとして購入しましたが、残念ながらこのこて先は先っちょの温度が低いため小さなチップ素子のハンダ付けに使えませんでした。どんなに温度を上げても上がらず。いったい何のために買ったのかと結構ショックでした。もし先っちょの温度が上がる個体であれば、良品、温度が上がらないものであれば不良品ということですね。自分は購入から時間が経ってから使用したので返品は利きませんでした。
鴨居のおじさん
June 4, 2025
細かいところの半田作業用に購入したが、グラウンド部のような熱容量が大きいところでは、温度の下がりが大きく使いづらい、使い分けが必要。
eugene
May 25, 2025
works good. no problem.
Russ Garner
May 7, 2025
I have used knock off solder tips on my Hakko iron and I always find myself coming back home to Hakko tips. Durable, even heating, no surprises. Good stuff. Recommend.
Jim P.
April 18, 2025
Genuine Hakko tip in new packaging. I needed a tip for soldering fine pitch SMT parts to replace the burned out tip on my $100 PRC made soldering station. Fortunately, it uses Hakko T18 series tips. I expect good service from this tip.
Customer
April 7, 2025
Definitely get this for small wire gauge soldering. The Hakko irons are wonderful and they "push" heat all the way to the tip of this. This is all I use, and I regularly solder from wire gauge 22 up to 30.
Michael Buck
March 31, 2025
This is another high quality, well made Hakko tip. I have many Hakko tips and they all work well and last a long time. It is great to find as many specialty tips as Hakko makes. I definitely recommend Hakko tips for your soldering needs.
John M.
March 27, 2025
The T18-BL soldering tip is another great product from Hakko and is my "weapon of choice" for 0805 components and any SOIC chips. My only complaint is that it is hard to keep it tinned when working with lead free solder at high temperatures, but that is a problem with all irons I have used.
Michelle Goodnight
March 24, 2025
Great tip for those very small surface mount parts. Like the 0404 and 0603 sizes. Had trouble heating quickly above 0603, which is to be expected.
cat feeder
March 22, 2025
Haven't used it much, my old eyes aren't really going to make a lot of use of this thing but it's good to have around
Olli
March 8, 2025
Bought this to see if the chinese soldering station could be upgraded to better performance. The difference between the one included with the yihua and this hakko tip is astounding, would highly recommend this part to anybody with a Yihua 853AAA.
CrashedFiesta
March 2, 2025
You can get a pack of five or six tips for less than the cost of this one. But, after a few intensive soldering sessions the cheap tips basically corrode away. Not this one.The saying 'you get what you pay for' is 100% accurate here. It's been used for several weeks and still shows no signs of corrosion or blackening that the cheap ones do.
Tone
February 7, 2025
Not that good to be fare. The end of the tip is not hot enough to do the job intended for. Unless you turn the heat right up but then it just burns. I ordered 2 so hopefully it was just one bad one from the batch.
カスタマー
January 14, 2025
他の方も書いていますがこれから購入する方はご注意ください。チップ素子のハンダ付けとして購入しましたが、残念ながらこのこて先は先っちょの温度が低いため小さなチップ素子のハンダ付けに使えませんでした。どんなに温度を上げても上がらず。いったい何のために買ったのかと結構ショックでした。もし先っちょの温度が上がる個体であれば、良品、温度が上がらないものであれば不良品ということですね。自分は購入から時間が経ってから使用したので返品は利きませんでした。
鴨居のおじさん
January 11, 2025
細かいところの半田作業用に購入したが、グラウンド部のような熱容量が大きいところでは、温度の下がりが大きく使いづらい、使い分けが必要。
Recommended Products
