Your cart is empty.
Your cart is empty.Product Description
Shars Tool 0-4" Depth Micrometer
- Measuring Range: 0-4"
- Graduation: 0.001"
- Accuracy: 0.0002"
- Base Length: 2.5"
- Rod Diameter: 0.177"/4.5mm
- The threads are hardened, ground, and lapped for accuracy
Product Included:
- 4 pcs of measuring rods
- Fitted case
Product Spotlight
- Satin chrome finish to prevent glare on the vernier
- Interchangeable rods are fitted into the micrometer base against a positive stop and locked
- Base constructed from tool steel, hardened, precision ground, and micro lapped
- Measuring rods with a spherical head
- Rods hardened, ground, and lapped on measuring surface and adjustable in either direction
DEPTH MICROMETER OPERATION MANUAL
- Interchangeable rob
- Base
- Sleeve
- Locking device
- Thimble
- Ratchet stop
- Spanner
Frank Bourbon
July 28, 2025
Item new good product ty so much for being affordable!
You get what you pay!
July 25, 2025
Works well BUT pins fall right out of checking something vertically and have a useless taper that makes it hard to check narrow surfaces.
benjamin towle
June 7, 2025
Was shocked how good this is for the price. If you know how to adjust the zero they passed inspection at my work.
T. Schu.
March 3, 2025
That’s my biggest complaint. Seemed nice otherwise. Even came with a hand signed certification of accuracy. Didn’t test accuracy, just returned immediately. I’m upset about the minuscule line in the description. I need flat ended rods to measure ledges.
Smeek
February 9, 2025
I should've bought a Fowler . Or , a different brand name I've been using for decades . Tried to save a little cake , oh well . Probably pass this on as a secret Santa gift.
Mattie
January 26, 2025
Better than calipers because of the larger "flat" reference surface but using the rachetyields the advertised +- 0.0002 precision.BTW, the rachet was disassembled upon arrival (2 collars, a spring, a screw, and a barrelfloating in an unsealed plastic bag.
Todd
January 9, 2025
Way over price for an almost unusable depth gage. I wish they would have mentioned that in there description of this depth micrometer set had fully rounded tip and not flat tip. I would never bought it. Waist of money.
steven
December 13, 2024
I have the 0-6" set and they are mediocre. Doesn't stay calibrated. Everytime you change the measurement rod it has to be recalibrate and even then it's not trustworthy. Mitutoyo is the best for depth mics.
Recommended Products
$17.98
$ 7 .99 $7.99