Your cart is empty.
Your cart is empty.Phillip W.
July 23, 2025
So, I looked at all the reviews that complained about the pins being too small and not fitting the sunshields properly. It actually caused me to delay purchase and consider the more expensive option - purchasing a new sunshield. I actually went to a local big box cycle gear store and inquired about pin replacements for the shield. According to sales associate, nothing exists. I finally went ahead and made the Amazon purchase, and crossed my fingers. I'm glad I did! The side of the pin that fits on the inside of the shield is noticeably smaller, but that's what makes it work - IMHO. Once the tension from applying the pinlock is added (which is what caused the original pin to probably snap in the first place, right?) everything tightens up and the pinlock fits perfectly on the sunshield. Took it out for a spin, and zero issues. (Shoei Neotec 2 sunshield and helmet)
The Good guy
July 21, 2025
Just installed. They fit perfectly on my Voss 988-1 helmet. This can save you buying a brand new shield. Order two more sets for the future.
KaptSlow
July 17, 2025
It was 1mm too small to fit correctly in a Shoei NeoTech II Helmet. Since I needed to use the helmet, I used clear silicone to glue it into the pin-lock hole.
Texas T
July 5, 2025
One of the plugs had come out of my helmet shield and these made a perfect replacement for a great price!
Jonny C
July 4, 2025
They work but theyre still a little loose sometimes
JDM4006
June 27, 2025
These better work better than factory and not fly into pieces when you go to clean your pinlock. For 10$ you only get 2. I thought you get a little baggy of 6 or something. Na. You get 2. Use em wisely. If you got multiple visors it’s gonna get expensive. I will update the review if these are junk. I found replacements in the time it took to ship these.
Jason Baker
June 9, 2025
I drilled holes in a mirrored faceshield and used these to add a pinlock to a Scorpion EXO-AT960 Helmet.
Jnlix
June 2, 2025
Super easy to install on my clear OEM scorpion r1 clear visor. I haven’t tested it out so i’ll have to come back for a performance update. They felt super good quality, but only time will tell. They look really good!
Jorge Estrada Montiel
May 18, 2025
Me urgía por eso no los devuelvo. Uno pon no atornilla simplemente el tornillos pasa sin ejercer fuerza y el otro apenas y se pudo fijar. Espero medio dure en lo que encuentro algo de mejor calidad.Quedo flojo y mientras detiene el pinloc, pero por este precio uno espera algo mucho mejor.En otras app el mismo cuesta 4 veces menos.Pedimos, o los califico en cero porque mientras estiy utilizando 1.
Gabriel Cordeiro Costa
May 13, 2025
The screws came smaller than the holes to be attached. Besides it, one hole for the screw to attach is bigger than the one in the other pin. I will try to upload the picture.
Mauricio
May 12, 2025
Es lo que esperaba y exacto que si en el casco no mandado hacer 👍
Mr A S Hall
May 7, 2025
One of the posts in my visor came away, bought these as a replacement, good quality and fixed for the pin lock, quite expensive though!
JOB SABURO AZANO MATSURA
April 25, 2025
Funciona perfectamente ya las instale en la mica de mi casco y lucen super
Phillip W.
April 22, 2025
So, I looked at all the reviews that complained about the pins being too small and not fitting the sunshields properly. It actually caused me to delay purchase and consider the more expensive option - purchasing a new sunshield. I actually went to a local big box cycle gear store and inquired about pin replacements for the shield. According to sales associate, nothing exists. I finally went ahead and made the Amazon purchase, and crossed my fingers. I'm glad I did! The side of the pin that fits on the inside of the shield is noticeably smaller, but that's what makes it work - IMHO. Once the tension from applying the pinlock is added (which is what caused the original pin to probably snap in the first place, right?) everything tightens up and the pinlock fits perfectly on the sunshield. Took it out for a spin, and zero issues. (Shoei Neotec 2 sunshield and helmet)
The Good guy
April 11, 2025
Just installed. They fit perfectly on my Voss 988-1 helmet. This can save you buying a brand new shield. Order two more sets for the future.
KaptSlow
April 3, 2025
It was 1mm too small to fit correctly in a Shoei NeoTech II Helmet. Since I needed to use the helmet, I used clear silicone to glue it into the pin-lock hole.
Texas T
March 25, 2025
One of the plugs had come out of my helmet shield and these made a perfect replacement for a great price!
Jonny C
March 17, 2025
They work but theyre still a little loose sometimes
JDM4006
March 11, 2025
These better work better than factory and not fly into pieces when you go to clean your pinlock. For 10$ you only get 2. I thought you get a little baggy of 6 or something. Na. You get 2. Use em wisely. If you got multiple visors it’s gonna get expensive. I will update the review if these are junk. I found replacements in the time it took to ship these.
Jason Baker
February 25, 2025
I drilled holes in a mirrored faceshield and used these to add a pinlock to a Scorpion EXO-AT960 Helmet.
Jnlix
February 23, 2025
Super easy to install on my clear OEM scorpion r1 clear visor. I haven’t tested it out so i’ll have to come back for a performance update. They felt super good quality, but only time will tell. They look really good!
Jorge Estrada Montiel
February 18, 2025
Me urgía por eso no los devuelvo. Uno pon no atornilla simplemente el tornillos pasa sin ejercer fuerza y el otro apenas y se pudo fijar. Espero medio dure en lo que encuentro algo de mejor calidad.Quedo flojo y mientras detiene el pinloc, pero por este precio uno espera algo mucho mejor.En otras app el mismo cuesta 4 veces menos.Pedimos, o los califico en cero porque mientras estiy utilizando 1.
Gabriel Cordeiro Costa
February 12, 2025
The screws came smaller than the holes to be attached. Besides it, one hole for the screw to attach is bigger than the one in the other pin. I will try to upload the picture.
Mauricio
February 5, 2025
Es lo que esperaba y exacto que si en el casco no mandado hacer 👍
Mr A S Hall
January 29, 2025
One of the posts in my visor came away, bought these as a replacement, good quality and fixed for the pin lock, quite expensive though!
JOB SABURO AZANO MATSURA
December 30, 2024
Funciona perfectamente ya las instale en la mica de mi casco y lucen super
Recommended Products
